01 / Inspection dossier · Kyiv studio

  • Salt brine
  • Gravel
  • UV load
  • Freeze-thaw

Ceramic coating specified for the roads you actually drive

Eight film-depth readings, a defect map under dual inspection lamps and a written substrate classification for every panel. The package is chosen after the inspection, never before it.

Package focus
  1. 01 Wash, tar removal and iron decontamination logged
  2. 02 Eight film-depth readings recorded per panel
  3. 03 Defect map photographed before any polish
Preparation gate: 6 checks Substrate class: recorded Not-included rows: published

03 / Surface conditions

Four conditions decide whether a coating holds in Ukraine

Salt, gravel, UV and freeze-thaw act on different panels. Each row states what we inspect and whether the surface passes the preparation gate before a package is quoted.

Condition Where it shows Gate Required before coating
Winter brine and road salt Lower doors, sills, rear arch liners Pass Two-stage rinse, pH-neutral decontamination, panel wipe, with the film-depth record attached.
Gravel and stone chips Front bumper, bonnet leading edge, mirror caps Conditional Paint protection film on impact zones. Coating alone is not quoted as chip protection.
UV and summer heat Roof, bonnet, south-facing panels Pass Coating batch number and UV stabiliser entry logged on the technical data sheet.
Freeze-thaw cycles Wheel arches, seams, tailgate gaps Conditional Seam and sealant inspection first. Failed sealant is repaired before any coating layer.

03 / Preparation protocol

Six documented steps between inspection and a sealed panel

Every step closes with a measured checkpoint. A panel does not move to the next stage until the reading is written into the vehicle file, so the price you approve stays tied to a condition we recorded.

  1. 01

    Intake and film-depth audit

    Eight ultrasonic readings per panel against a reference gauge, plus a defect map drawn under dual inspection lamps.

    8 readings per panel
  2. 02

    Decontamination

    Iron fallout dissolver, tar removal and a clay pass, then a wipe test repeated until the towel stays clean.

    Clean wipe test
  3. 03

    Paint correction

    Test spot first, then panel-by-panel work with clearance held below three micrometres of clear coat.

    Clearance under 3 µm
  4. 04

    Substrate classification

    Original clear coat, single-stage paint or a previous repaint is recorded for each panel, because each one takes a different coating.

    Written per panel
  5. 05

    Controlled application

    Panel temperature held between 18 and 24 °C in a filtered bay, two layers applied with a flash window we actually measure.

    Bay log kept
  6. 06

    Cure check and handover

    Twenty-four hour cure inspection, gloss readings across the bonnet and roof, then a printed maintenance sheet for Kyiv seasons.

    Recheck at 24 h

03 / Package comparison

Three layers, one table, every exclusion printed

Each row is filled from the inspection sheet of the car in front of us. Service life figures are the manufacturer-documented range for Kyiv driving conditions and depend on the winter interval shown below.

SpecificationEssentialRoadFull body
SubstrateSound paint, one decontamination passPaint above 90 micron film build, bumper and bonnet filmedOriginal paint or fully cured repaint, panel by panel
Layers appliedCeramic layer onlyFront paint protection film plus ceramic over filmFull-body film plus ceramic over film
Dry film thickness2-3 micron coating180 micron film, 2-3 micron coating200 micron film, 2-3 micron coating
Documented service life24 months60 months film, 36 months coating120 months film, 48 months coating
Warranty12 months on workmanship36 months film, 24 months coating60 months film, 36 months coating
Winter maintenance intervalBrine rinse every 14 daysEvery 10 days, film edge check monthlyEvery 10 days, studio inspection yearly
Not includedWheels, glass polishing, paint repairWheels, glass polishing, interior, paint repairWheels, glass polishing, interior, paint repair, correction beyond one stage

Read the warranty and exclusionsBook an inspection

05 / Maintenance

Wash and inspection intervals written for Ukrainian seasons

A coating changes how paint behaves, not how often it needs attention. The schedule below assumes outdoor parking and 12,000 to 15,000 km a year. Shorten the winter rows if the car sleeps in a heated garage.

Intervals are counted from the handover date printed on your coating card.
Season Action Interval Why it matters
Winter Dec to Feb Touchless rinse of lower panels, arches and sills Every 5 to 7 days Brine and grit dry into the film and hide early defects.
Winter Dec to Feb Contact wash with a pH-neutral shampoo, two buckets Every 3 to 4 weeks Salt film left on top layers dulls gloss and traps moisture.
Spring Mar to Apr Iron, tar and road-chemical decontamination Once, first warm week Winter residue bonds to the surface and blurs bead behaviour.
Summer Jun to Aug UV and water-beading check under inspection lamps Every 8 weeks Strong sun shows oxidation and dry spots on horizontal panels first.
Autumn Oct to Nov Pre-winter inspection before the first gritting Once, book in September Chips found now are repaired before salt reaches bare substrate.

06Proof and warranty

Every claim carries a reading, a panel, or a clause

Film depth is logged panel by panel before any machine polishing starts, a cured test plate is kept for each coating lot we apply, and the warranty terms are handed over in writing when the car is released.

Paint depth survey, 2019 Skoda Octavia, four readings per panel, values in micrometres
PanelMean depthSpreadPrep gate
Hood1189Pass
Roof1217Pass
Front bumper16422Repaint
Rear left quarter1126Pass

Test panels

  • Coated plate kept per lot and cure batch
  • Cross-hatch adhesion checked after 14 days
  • Water contact angle recorded on the same plate

Written terms

  • Service-life range quoted with conditions attached
  • Technical data sheet named and supplied on request
  • Annual inspection required to keep cover active

Claim path

  1. Notice. Photo set and description sent to contact@pnovateqch.com.
  2. Inspection. Car re-examined under dual lamps within 14 days.
  3. Comparison. Depth re-measured against the original record for that panel.
  4. Outcome. Re-coat or repair inside scope, exclusions listed on the package warranty page.

08 / Contact

Book the inspection before you book a package

Preparation is documented before it is priced. The studio measures film depth panel by panel, maps defects under dual inspection lamps, and classifies the substrate, then matches a coating or film layer to how the car is actually driven in Kyiv.