01 / Packages

Every package is priced after the same preparation gate

Three coating and film options are listed below with the specifications that actually differ. Nothing is quoted until the paint has been measured, mapped and classified.

  1. Gate A

    Preparation gate

    Eight film depth readings per panel, a defect map under dual inspection lamps, and a written substrate classification. A car that fails the gate is re-scoped, never discounted.

  2. Gate B

    Material fees

    Coating is measured in millilitres per vehicle class, film in square metres per panel set. Both appear as separate rows so labour never hides the material cost.

  3. Gate C

    Selection guidance

    Coating handles chemicals, UV and water behaviour. Film absorbs stone chips and abrasion on the bonnet, bumper and sills. Choose the layer by the damage you can point at.

03 / Package specification

What each package covers, row by row

The same specification is applied to every package, so the differences sit in the layer build, quoted service life and care interval. Preparation is recorded before any coating is priced.

SpecificationEssentialRoadFull
SubstrateWashed, decontaminated and depth-mapped at eight points per panel. Any panel that fails the gate is held for repair.Same gate, plus a written substrate classification for each panel.Same gate, plus dual-lamp inspection and a defect map before approval.
LayersOne solvent-based primer layer and one coating layer.Primer plus two coating layers, 18 to 22 microns total film build.Primer, two coating layers and a top sealant, 24 to 28 microns.
Durability24 months, manufacturer data sheet available on request.48 months with annual inspection and documented care.60 months with annual inspection and documented care.
CarepH-neutral wash every three weeks during winter brine season.Same interval, plus spring decontamination after the salt period.Same interval, plus autumn pre-winter inspection before the road season.
Not includedWheel removal, glass polishing, interior treatment, paint repair and correction of brush-wash damage are excluded from all three packages.

Service-life figures are documented manufacturer ranges with conditions attached. Review the warranty and exclusion terms before booking.

04 / Warranty and exclusions

Written terms, exclusions, and how a claim is opened

Service life is quoted as a manufacturer range tied to the maintenance intervals printed on your package sheet. Claims follow a fixed four-step process and are assessed against the paint-depth record taken before preparation.

Documented coverage by package

Package Service life Inspection visits Substrate condition
Single layer 24 months 1 per year Sound original paint
Two-layer ceramic 36 months 1 per year Sound paint, no prior wraps
Ceramic with film 60 months on film 2 per year Panel map approved

Ranges assume winter brine rinsing at least twice a month in Kyiv and the stated inspection visits. Technical data sheets are available on request.

Claim process

  1. Step 01Report the defect by email with daylight photographs of the panel.
  2. Step 02Studio books an inspection slot and re-reads film depth on the affected panel.
  3. Step 03Written finding issued: maintenance fault, preparation fault, or external damage.
  4. Step 04Approved cases are re-coated on the affected panel; declined cases are quoted separately.
Open a claim

05 / Inspection booking

Book the inspection before you choose a package.

The visit takes about 40 minutes. We record eight film-depth readings, map defects under dual inspection lamps, and write a substrate classification for every panel. The result decides which tier is quoted, and the quote lists every exclusion in writing first.

Studio at 7A Vasylia Stusa St, Business Center Horizon, Kyiv. Monday to Saturday, 09:00 to 19:00. Call +380 685 607 3630 or write to contact@pnovateqch.com.